UK - Speed is a dangerous imperative where rigging is concerned, yet there is an ever-growing demand for fast efficient turnover of productions. Echo Arena Liverpool, part of Arena and Convention Centre Liverpool (ACC Liverpool), the most recent addition to the UK's circuit of large-scale indoor events venues, has addressed this demand head on.

"The rigging grid system installed over the stage, and repeated above the centre of the arena floor, is second to none in terms of sheer utility and speed of operation," says David Bond of Star Events Group. "It has the reduction of Working at Height hours at its core."

The grid system was installed and is operated on behalf of the Echo Arena by Star Events Group; the control and hoist system used to move it comes from Lift Turn Move (LTM), a specialist entertainment rigging hardware supplier based close by in the Wirral.

"This is one of the largest house system installations LTM has worked on," explained John Jones at LTM. "The input and knowledge sharing we've received from Star Events has proved invaluable. The main grid is supported on 12 three- ton LoadGuard chain hoists, the centre grid from eight more."

"These hoists, compared to other comparable devices, bring real advantages to the operation of the complete system," added Bond. "They conform to BS7906: Part1, Category A specification, as such they exceed the requirement for secondary attachment. We 'dead off' the grid once it is raised to trim, but the added reassurance of the double brake, 4 position limit switches, and drive-train independent clutch design of the LoadGuard hoists makes the whole operation of the grid firmly focussed on simplicity and safety."

LTM has been supplying these specific LoadGuard hoists for more than three years. "We've been putting them into theatres, multipurpose venues and schools," said Jones. "Most venue operators prefer not to fit secondaries if they have the choice; the features of the hoist specification means a truss can be flown, simply unplugged, and left in position - without the need to rig safeties at height."

The two grids are based on Steel Grid Truss (model FGT7); a proprietary product designed specifically for this application by Star Events, and are fitted with personnel catch-nets between all node points for added security. The hoist set is controlled using an IBEX system. Again supplied by LTM, the IBEX system is programmed to self level the grid every three metres as it rises from stage level to trim, thus ensuring no single point can become overloaded, or the total grid structure become adversely stressed.

"LTM have given us the right product for the job," concluded Bond. "Their contribution has been a significant factor in the success of this project."

(Jim Evans)


Latest Issue. . .