Elation helps create magic in Dollywood
- Details
The Wildwood Tree comes to life each evening during a light and sound experience created by The Imagination House for Dollywood and narrated by Dolly Parton herself. Designed and built by LifeFormations, the 50ft tree’s gnarled trunk emerges from a rock base before spreading into a beautiful green-leaf canopy covered with 650 custom RGB LED butterflies, controlled and programmed by Weigl Controls.
Lighting designer and lighting programmer for four separate seasonal experiences is local resident Susan Rose. She has previously designed lighting for Dollywood shows and spent nearly a year on the Wildwood Tree project. “When I started on the project the tree didn’t even exist yet so we really started from the ground up,” Rose comments, adding that she was given a sample piece of the tree trunk to see how light would react on it.
Bandit Lites also got involved in the project early on, she says, and were critical in setting up demos and helping her look at the various lighting possibilities. “I knew we needed outdoor-rated lights to fight with Mother Nature and we needed something with good intensity to shine through at dusk. Bandit recommended we go with Elation and as I was already an Elation fan and it was also in our budget range, I took a closer look.”
Each season of the year features a captivating new Wildwood Tree experience for guests with narration accompanied by music and light projection onto the tree in concert with the colour-changing butterflies.
As the Wildwood Tree is a 360° experience, Rose positioned lighting fixtures on four poles to illuminate the tree from all four sides. Mounted on each pole - each pole is at a different throw distance - are four Proteus Maximus LED profile moving heads, four SixPar 300 LED Par lights and four LED lekos. The SixPars splash an array of colour onto the rock base, tree trunk and canopy while the 50,000-lumen Maximus units project custom gobos onto the tree to enhance story telling through custom patterns and animations.
Each Proteus Maximus fixture houses custom gobos with a few stock gobos also in use. Rose says that specific gobos play a key role in the storytelling - butterflies, lightning, dragonflies, Christmas ornaments, snow or leaves that fall down from the top of the tree - and needed to be indexed properly. A complex programming challenge, Rose says that she really had to put a lot of thought into the gobo load in the four Maximus lights.
“The gobos really tell a story on this and are quite important. I really had to put some thought into which gobos go into which wheel and what slot, which ones needed to index and which ones could go on the static wheel, keeping in mind how I could create transitions.” Multiply that by four shows and you can understand the complexity. “It was probably the trickiest programming I’ve done in a long time,” she says, “but it came out nice. The crispness I could get out of the focus and zoom with the gobos was fantastic.”
Each experience is a few minutes long with ample time between shows to enjoy the majesty of the area and the beauty of the tree itself. “During the shows there is a lot of colour but for our static look in-between shows I wanted it to look like a real tree,” Rose explains. “I keep the gobos out of focus to give it some depth and contour and on the rocks I added a bit of steel blue to make it look like a real rock. On the trunk, I added a bit of amber and for the canopy, I added a bit of green. I was basically painting the tree with light and accenting the natural colours that were in it to make it look real.”
(Jim Evans)
