Most recently, Entec supplied sound and lighting equipment and crew for Albarn's critically acclaimed sold-out shows with his live band, The Heavy Seas, at London's Royal Albert Hall venue.
Over the years, Dave Byars has been tasked with realizing the vision of musicians and artists in a plethora of venues ranging from tiny local clubs to stadiums around the world.
His design for Albarn's 2014 tour and the RAH shows included a heptegram - seven pointed star - backdrop, a symbol of particular interest to Albarn. Entec had in fact provided three touring sizes of the drop so there was always one handy for every size of venue or stage they were playing leading up to these RAH dates.
For the Royal Albert Hall, Byars' trussing design was based on a virtual seven-point star shape which he drew 'above' the stage and used as a structural outline.
Once his initial renderings of the star and the resulting placement of trusses was established, a further parameter was added, which was that only multiples of seven lightsources should be active at any one time throughout the set.
Another element of the creative brief was to keep the look intimate and simple reflecting the personal nature of Damon's 2014 debut solo album Everyday Robots, whilst simultaneously, highlighting some of the Royal Albert Hall's architecture.
The venue is a vast space with a massive ceiling height, so the key was reflecting the solitude of Albarn onstage in the huge void ... whilst also making him feel within reaching distance of his audience.
Byars' solution to close down the space was to concentrate much of the lighting on the floor, a challenge in itself due to an extraordinary amount of performers and special guests - including Graham Coxon, De La Soul, grime rapper Kano, Brian Eno and Malian musicians Afel Bocoum and Madou Diabaté - plus two choirs and a strings section. Onstage real estate was at a premium!
"This all galvanised me, but it was a great brief," declares Byars. "Working with Damon there is never a dull moment, and I love achieving these goals."
Equally important - after the low key numbers was to rock-out with the lighting and show off the venue during the large up-tempo songs. The lighting rig was also designed to fit sympathetically into the distinctive and idiosyncratic stage space.
Byars and the Entec crew started work on site by blacking out the venue's organ and flying their own backdrop - produced by Rock Drops - in front, which worked perfectly.
The multiple trussing pieces were then flown and angled relative to the original virtual 7-point star with four 16ft upstage trusses providing the rear lighting positions and also sub-hung with lights at different angles.
Overstage in the middle position were two trusses, one above the other, connected by a series of 3 metre trusses at different angles, as dictated by the co-ordinates of the 'star'.
The front truss was a 34ft straight run, loaded with eight Clay Paky QWO 800 profiles for key lights - four used for general white key light, and four for the choir and strings - and 18 x CP Sharpy Washes used for the front and forestage.
The four mid trusses were rigged with a mix of three QWO 800s and an A.leda B-Eye K20 on each, with a total 12 Sharpies distributed on the mid and upstage sections. These fixtures were used for back washing the performance area and for specials.
The floor based sections of the rig started with the rear stage 'shelves' behind the choir stalls each of which was rigged with six QWOs, six Sharpys and two B-Ey
