ENTTEC's light bars feature smooth dimming features and colour temperature adjustability. The Aleph 2 has advanced colour-mixing options with up to six LEDs (Red, Green, Blue, and Warm, Cool, or High CRI White), and various combinations of the same.
"The Aleph 2 can mix six LEDs per light engine. This means the designer can achieve the vibrant colors wanted or the softest whites needed for TV and film," explains Nicolas Moreau, founder and managing director. "Combined with the E-DIM smooth dimming technology, adjusting very low levels is not an issue anymore."
Making the Aleph 2 even more adjustable, various lenses can be used with the different colour options. Lenses can be 10°, 20°, 40°, 60° and 120°, or the vertical spread favouring wall wash type, measuring 35° x 60°.
There are three versions of the Aleph 2: the indoor, ruggedized, or outdoor LED light bar. All Aleph 2 light bars come in two sizes (300 mm and 600 mm) and two power ratings (High Power and Junior). ENTTEC used CREE LEDs to guarantee the longest life and highest light quality.
The default Aleph 2 light bar is the indoor version, which can be pipe, ground, wall or ceiling mounted. For the entertainment industry, the light bar is suitable for lighting large backdrops, or as a colour wash.
The Ruggedized Aleph 2 light bar was conceived as a workhorse fixture for the mining industry, or applied to industrial machinery, trucks and high-bay warehousing. ENTTEC added "body armour" and vibration resistant chassis reinforcement bars to the Ruggedized light bar and conducted extensive modal analysis to guarantee life in the harshest environments.
The Aleph 2 Outdoor light bar, with an IP rating of 67, is suitable for many applications, from landscape lighting to washing the side of a building or illuminating a parking lot.
The Web site also features the Aleph 1 Series LED strip, a medium power, aluminum-backed, rigid LED strip for indoor applications, like cove lighting, under cabinet lighting, signage and translucent diffusers, product displays and dashboard light.
Two more LED products that will be ready to ship later this fall are displayed on the Web site. ENTTEC designed the Aleph 1 Series LED Round fitting to bring flexibility, energy efficiency and aesthetic beauty to a form factor similar to traditional MR16 bulbs. The LED Round 18C has built in heat management features and mechanical connection options to support a range of different mountings and diffusers.
The upcoming Aleph 3 Series LED panels - in 1'x4' and 2'x2 tile arrangements - are for indoor commercial applications, especially suitable for drop ceiling retrofit or new construction. ENTTEC integrates control into the Aleph 3 LED lighting system; allowing dimming options, colour temperature adjustment, and even RGB colour mixing. Instead of using just wall switches, the Aleph 3 can be controlled by Wi-Fi, a custom touch screen wall controller, or an automatic daylight harvesting system.
Every single fixture in the Aleph line is controllable with DMX512, either inherently or when plugged into a properly configured power supply or LED driver. There is an app for iPhone control capability too. ENTTEC's gear is also compliant with the Remote Device Management (RDM) standard, an extension of DMX512 which lets you adjust configurations, starting address and sometimes even perform monitoring of on-board feedback sensors remotely.
ENTTEC's new LED products will be shown on the trade show floor at LDI 2011.
(Jim Evans)
