BSR E1.1, Entertainment Technology - Construction and Use of Wire Rope Ladders, is a revised version of ANSI E1.1-1999, Entertainment Technology - Construction and Use of Wire Rope Ladders. E1.1-1999 was offered for public review to reaffirm it last year, since it was at the five-year anniversary at which an American National Standard must be reaffirmed, revised, or withdrawn. No one offered any public review comments, but close examination of the document by Rigging Working Group members showed that the specification for the wire rope needed to be changed. This is a substantive change, so this revised version is being offered for public review.
BSR E1.15, Entertainment Technology - Recommended Practices and Guidelines for the Assembly and Use of Theatrical Boom & Base Assemblies, is a draft standard for the assembly and use of ground-supported variable and fixed-height lighting fixture suspension devices. These devices normally consist of a heavy floor base, a vertical member or members, and horizontal members (arms) coming of the vertical member for the attachment of luminaires or accessories. The draft standard has been offered for public review before, but substantive changes have been made in response to comments, so it is being offered for review again.
BSR E1.17, Entertainment Technology - Multipurpose Network Control Protocol Suite, is the draft standard commonly called "ACN." The draft standard is a suite of protocols offering needed services in network management, device management, device description, and device control with reliable multi-cast transport on data networks that use the common Internet Protocols. Substantive changes have been made since the last public review, so it is being offered for public review again.
BSR E1.24, Entertainment Technology - Dimensional Requirements for Stage Pin Connectors, is a configuration standard covering the dimensional requirements and mechanical requirements related to intermateability for a series of split-pin and sleeve wiring devices known as Pin Connectors or Stage Pin Connectors that are used predominately in the theatre, television and motion picture industries in North America. It is not a safety standard.
BSR E1.25, Recommended Basic Conditions for Measuring the Photometric Output of Stage and Studio Luminaires by Measuring Illumination Levels Produced on a Planar Surface, describes the basic testing conditions (e.g. the condition of the luminaire, the power supply, et cetera) for any of a number of methods of measuring a luminaire's output that involve shining the light from the luminaire on a flat wall and then measuring the levels of illumination produced. The draft standard does not describe the equipment or measurement method used to measure the illumination. The document has been offered for public review before, but the resolutions to the comments have resulted in substantive changes to the document, so it is being offered for public review again.
A complete public review packet consists of the draft standard and a public review response form. Members of the public are invited to review each of the draft standards and to give an opinion on its acceptability as an American National Standard. Essentially, a person responding to the public review is being asked to cast a letter ballot with possible votes of "yes," "yes with comments," and "no with reasons." "No" votes need to be supported by stated reasons so the standards committee will have an idea of what would need to be changed to earn an unqualified "yes" vote.
