The PLASA Awards for Innovation
RC4's new RC4Magic DMX4Flkr with RC4 Flicker Effects Engine has been nominated for the PLASA Awards for Innovation. "The DMX2flkr and DMX4flkr produce beautiful flicker and flame effects," says RC4. "Use the RC4 Flicker Effects Engine to define unique, personalised looks, not pre-packaged or canned effects. You determine - in real time with DMX channels - how oscillators and random-number generators modulate multiple dimmer channels. Build an effect in minutes, not hours. Tweak it in seconds, anytime."
The RDM Showcase
The LumenDimM4 from RC4 Wireless is a miniature wireless DMX receiver and 4-channel DC dimmer for use with LumenRadio CRMX transmitters. It provides full RDM support.
Each dimmer handles up to 50W at 12V. The device operates from 6V to 30VDC, to a maximum total load of 16A. Over-temperature and over-current shut-down provide protection again wiring errors and load faults.
Any DMX channel can be assigned to any dimmer, with a choice of non-dim, linear, or ISL curves optimized for smooth, flicker-free LED dimming. This makes theLumenDimM4 ideal for stage, film, or video. Use RDM to configure DMX channel, dimmer curve, pwm frequency, and smoothing (response time) for each individual dimmer output. RDM sensors monitor battery voltage, internal temperature, and total device current draw, including minimum and maximum readings.
RC4 LumenDim4
The LumenDim4 from RC4 Wireless is a wireless DMX receiver and powerful 4-channel DC dimmer for use with LumenRadio CRMX transmitters. It provides full RDM support.
Each dimmer handles up to 150W at 12V. The device operates from 6V to 30VDC, to a maximum total load of 40A. Over-temperature and over-current shut-down provide protection again wiring errors and load faults.
Any DMX channel can be assigned to any dimmer, with a choice of non-dim, linear, or ISL curves optimized for smooth, flicker-free LED dimming. This makes theLumenDim4 ideal for stage, film, or video, particularly where high-power halogen lamps are required. Use RDM to configure DMX channel, dimmer curve, pwm frequency, and smoothing (response time) for each individual dimmer output. RDM sensors monitor battery voltage, internal temperature, and current draw for each dimmer, including minimum and maximum readings.
