Rihanna and L-Acoustics fly high at Super Bowl
- Details
It was a performance that rivalled the game itself: 13 minutes featuring the best of her big hits, including Umbrella, Work, Diamonds and Run This Town, and a cast of an estimated 100 dancers, many of whom were also suspended in the air. Sound reinforcement was provided by an L-Acoustics K2 system deployed by ATK Audiotek, a Clair Global brand.
The deployment of the halftime sound system was very different this year. In the past, the temporary music system was loaded on wheeled carts that could be quickly moved into position as part of the overall halftime production staging, which takes place in a matter of minutes with scores of local volunteers pushing all of the staging elements together just after the referee’s halftime whistle sounds. However, the location of this year’s Super Bowl at State Farm Stadium meant it would be played on the venue’s unique but carefully groomed retractable grass field.
“The NFL mandated that nothing be on the field this year, so that meant no carts,” says Powell. Instead, the entire temporary sound system was flown. That, he adds, turned out to be a positive one. “Going in the air gave us more room, which meant more boxes - over 200 altogether, compared to the 76 boxes we could load on the carts - which meant more power and better, more complete coverage, even to the upper reaches of the bowl.”
State Farm Stadium already featured a fixed L-Acoustics system installed in 2016, primarily comprising a total of 122 K2 and 32 K1-SB enclosures. In preparation for this year’s halftime show, ATK supplemented the installed system with six more identical arrays of 13 K2 over four K1-SB, three arrays per side suspended from the venue’s Brunel truss system, plus four sideline hangs of KS28 subs.
They also flew two 10-enclosure arrays of L-Acoustics K2 plus a single sub hang of eight KS28 at each end zone. ATK’s system was powered by L-Acoustics LA12X amplified controllers, while LA8 amplified controllers drove the house system.
“We turned off the stadium’s end-zone K2 hangs because they weren’t in the positions we needed for the show,” explains Kirk Powell, engineer in chief for ATK on the project. “They are more of a shower-cluster design and not the right fit for the system we designed. The K1-SB in the sideline clusters are configured more for low-frequency extension of the clusters,” with the eight clusters of KS28 providing the “true” subwoofer performance.
“Additionally, eight subwoofers were also deployed for the lower bowl. There was a lot of power and a lot of subs, and according to Powell, they all got plenty of use. “This was a heavy low-end show,” he says.
Signal transport was over Dante to Focusrite RedNet D16Rs interfaces and from them to the LA12X amps over AES. The system was rounded out by a pair of DiGiCo Quantum338 audio consoles at FOH and an SD5 console used to mix monitors.
